Mechanical Properties
 
  Table.4 Tensile Test of ALSTAR
‚„
Symbol

Tensile
Strength
N/mm²
Elongation (%)
Thickness (mm)

0.4 to
0.6 ecxl.

0.6 to
0.8 ecxl.

0.8 to
1.0 ecxl.

1.0 to
1.6 ecxl.

1.6 to
2.3 incl.

Commercial quality
C
(>270)
(>23)
(>26)
(>28)
(>30)
(>31)
Drawing quality
D
>270
>32
>34
>35
>36
>37
Deep drawing quality
E
>270
>34
>36
>37
>38
>39
Note. 1
Value in parentheses for commercial use sheet are for reference only.
   
  Table.5 Bending Test of ALSTAR
‚„
Nisshin Symbol
Bending Angle
Inside Radius
Commercial quality
C
180º
1tR
Drawing quality
D
0.5tR
t=thickness
Deep drawing quality
E
 
Note.

The bending test shall be done by bending a test specimen by180º at a right angle to the rolling direction. The outside of the bend shall be free from exfoliation of the coating and from cracking and breaking of base metal. This dose not apply to those parts of the specimen that are within 7mm of either edge.

 
001